ELECTRIC MOTOR AND PUMP REWINDING SHOP SERVING PENNSYLVANIA, NEW YORK, AND NEW JERSEY

North End Electric specializes in electric motor and pump repair and rewinding services for businesses and industries across Pennsylvania, New York, and New Jersey from our locations in Scranton and Hanover Township, PA.

Here are some of the brands of electric motors we repair and rewind:

  • ABB/ Baldor
  • Leeson
  • Teco-Westinghouse
  • Hyundai/ WorldWide
  • Brook Crompton
  • Sew-Eurodrive
  • Marathon
  • Century
  • Faso
  • A.O. Smith
  • Weg

Our team of expert technicians brings years of experience in industrial pump and motor repair and a commitment to quality, delivering reliable and efficient operations for your motors and pumps.

Call 1-800-933-7341 to learn more or schedule a repair and rewind service for your electric motors and pumps.

Expert technician repairing motor and pump with tools and parts on workbench at industrial pump and motor repair shop in Pennsylvania. Specializing in motor and pump repair and rewinding services.

Benefits of Our Electric Motor and Pump Rebuild Services

Electric motor and pump rewinding and rebuilding can benefit your equipment in several ways. By opting for a rewind, you can extend the life of your motors and pumps, saving you significant costs over time. Rewinding can restore your motor or pump to its original performance or even improve it without a total replacement.

Extended Life

Our rewind service can prolong the life of your equipment, delaying the need for replacement and reducing waste.

Cost Savings

Rewinding is often less expensive than buying a new motor or pump and can save money and time.

Environmentally Friendly

By rewinding your motors and pumps instead of replacing them, you contribute to a more sustainable approach by reducing electronic waste. Every motor or pump we restore rather than discard helps conserve our planet’s resources.

Reduced Downtime

Our expert team at North End Electric provides efficient motor and pump rewind services, reducing your operations’ downtime. We reduce interruptions so you can maintain productivity and avoid revenue loss.

Improved Performance

Our team improves the performance of your motors and pumps during the rewind, leading to increased efficiency and reduced energy costs.

Contact Us

    Your Full Name*

    Email*

    Message*

    A Disassembled Motor And Pump, With The Various Parts Spread Out On A Clean Work Surface For Repair And Maintenance in Pennsylvania.

    Our Motor and Pump Repair & Rewind Services in Pennsylvania

     

    Electrical Overload

    Electrical overloads can overheat and damage your equipment. Our professionals at North End Electric find and repair the causes of your overloads so you can avoid them in the future.

    Shorted, Damaged, or Grounded Coils

    Damaged coils can interfere with your equipment’s power flow and impact performance. We repair issues with your coils so your motors run efficiently once again.

    Low Resistance

    Electric motors experience low resistance when their insulation becomes worn down over time, leading to excessive current flow and potential overheating. North End Electric finds and repairs the root problems of your equipment’s low resistance.

    Bearing Failure

    Faulty bearings mean your motor or pump won’t run as smoothly as it should. We find worn-down bearings and replace them with new, high-quality components to keep your operations running.

    Common Undiagnosed Motor and Pump Issues

    Electric motors and pumps can sometimes break down in small ways that are difficult to detect. We can inspect your equipment for undiagnosed problems – such as air in the system, cavitation (damaging bubbles), or misalignment – and repair them before they worsen.

    Motor and Pump Rebuilds

    We are also happy to provide complete electric motor and pump rebuilds in Pennsylvania, New York, and New Jersey. Rebuilds are sometimes necessary when too many parts have worn down. We take apart, inspect, and replace damaged parts to extend your equipment’s life and save money.

    Our Motor Repair & Rewind Process:

     

    1. Disassemble & Inspect

    We disassemble your motor and inspect every component for damage or signs of wear.

    2. Test & Inspect Windings

    When we rewind a motor, we test the rotor’s integrity and balance to guarantee optimal performance.

    3. Check and inspect tolerances on shaft and bearing fits

    Our professionals examine shaft and bearing clearances to ensure efficient operations.

    4. Test & Inspect the Rotor

    We test the rotor’s integrity and balance to guarantee optimal performance when we rewind the motor.

    5. Evaluate machine bearings, seals, and housings

    We replace worn bearings and seals to keep your motor running properly.

    6. Dip and bake stator and/or rotor

    The condition of your motor might require us to use a dipping and baking process that strengthens and protects the new windings for the long term.

    7. Reassemble

    After making the necessary internal repairs, we reassemble your motor in perfect order.

    8. Paint

    Fresh paint protects your motor from corrosion and makes it look better.

    9. Test

    We always test your repaired motor rigorously for performance, efficiency, and safety so you have peace of mind.

    Why Choose North End as Your Motor Rewinding Shop Serving Pennsylvania, New York, and New Jersey?

     

    If you’re experiencing issues with your motor or pump, North End Electric is here to help. Our experienced professionals assess the situation, determine the best solution, and offer high-quality rewinds to get your equipment back up and running.

    No matter the type or size of your motor, we have the tools and expertise to deliver top-notch service. We understand the critical role that motors and pumps play in your daily operations, and we’re committed to minimizing downtime and maximizing efficiency.

    Let us review your service needs and create a long-term plan for your motor and pump repairs and rewinding!

    Contact North End Electric for Expert Motor and Pump Repair

     

    If you need electric motor and pump repair or rewinding services in Pennsylvania, New York, or New Jersey, contact North End Electric today. We service the following region:

    You can find us at:

    1225 N. Keyser Ave, Scranton, PA, 18504

    210 New Commerce Blvd., Hanover Township, PA, 18706

    Phone: 1-800-933-7341

    You can count on us to restore your equipment to better condition and performance than ever before. We test and approve each repair before pickup. If you have any questions or are interested in a specific electric motor or pump service, contact our toll-free hotline at 1-800-933-7341.

    Other Services

    Motors

    Pumps

    Repair / Rewind

    Field Service

    Machine Shop Services

    Generator Maintenance & Repair

    Controls

    Electrical Contracting

    Water and Utilities

    Products

    Our Reviews

    Keith Lambert
    Keith Lambert
    2022-09-30
    You couldn’t ask for better service and Quality people. They have helped me out several times over the years. Super knowledgeable staff and willing to help troubleshoot and or rebuild electrical motors.
    buck Gilpin
    buck Gilpin
    2022-09-12
    Excellent service.
    Ike Butler
    Ike Butler
    2022-04-12
    Getting my pool pump rebuild
    Digna Ward
    Digna Ward
    2022-03-11
    Had what i needed, they are knowledgeable of the trade.
    Ernest Millon
    Ernest Millon
    2022-01-21
    The guys there are great, especially Anthony who personally took the time to find the precise brushes for my electric motor and get me going."five star" service.
    Y Va
    Y Va
    2021-12-27
    Excellent
    joe smulek
    joe smulek
    2021-11-24
    Very good guys to work with.